![]() If it was less than 10mm then reduce the steps per mm count by no more than 50 and repeat the above steps. Measure again and check it was 10mm movement. Now tell the machine to move that axis 10mm Take a reading for an axis and write it down. I use a cheap digital vernier for the next stage as it also allows me to fine tune the parameters. ![]() My own recommendation is to always use millimeters $13=0 There are a few calculators online to help with some of those aspects. ![]() This is especially true for a chines manufacturer who copies another chinese manufacturer (very common) Some manufacturers use different thread pitches. They may not be correct for your machine. Please be careful using other peoples parameters !Īt best they are a guide to somebody else's working machine. Hopes this helps anyone else with this issue. After looking through the files provided with the CNC3018 I found a copy of what I believe are the factory parameters for GRBL 0.9:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |